V. - 🚀 First-time Setup and Accessing the ggRock Server Application
This guide provides step-by-step instructions for accessing the ggRock Server Application (ggRock Web UI) for the first time. The process involves logging in with a ggLeap account that has the necessary permissions and optionally changing the password for that account.
🖥️ Access the Server Console
Connect to the server via one of the following methods:
Direct keyboard/mouse/monitor connection
SSH
Debian Control Panel
Retrieve the Server IP Address displayed on the login banner:
🔍 Note: Your Server IP will be unique to your LAN configuration.
🌐 Open the ggRock Server Web UI
On any PC within the same network, open a web browser and enter your Server IP. Press Enter.
🌟 Tip: It's recommended to use Chrome or Firefox for best results.
If you encounter a security warning, click "Advanced" and then "Proceed to [Your Server IP] (unsafe)":
🔐 Note: This is safe if you've followed official setup steps.
🔑 Log into ggRock for the First Time
Create a dedicated ggLeap service account to bind the ggRock server to your center.
Navigate to your ggLeap Webadmin at https://admin.ggleap.com and log in with the credentials provided by your sales manager.
Settings > Employees > Employees list
Click "Add employee"
Set a username and password
Enable the permission "Can get GG rock AuthToken"
🛡️ Note: The first ggLeap account used in ggRock becomes the owner.
Log into the ggRock Web UI:
On first login, you’ll be prompted to change your password:
✅ Confirm Successful Login
You should see the Machines page (initially empty):
🎉 Congratulations! You've successfully accessed ggRock!
You may now proceed with the "Configure the ggRock Array" guide.